Bakelite PF 2736 Hexion GmbH Phenol Formaldehyde Resin

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Dimensional Stability

Good Electrical Properties

Low Shrinkage

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Apparent Density		g/cm³	ISO 60
Molding Shrinkage - Flow		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Yield)		psi	ISO 527-2/5
Flexural Modulus		psi	ISO 178
Flexural Strength²		psi	ISO 178
Compressive Stress - Flow		psi	ISO 604
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/2eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/2eU
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 961/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1160 psi, Unannealed)		°F	ISO 75-2/C
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity (100 Hz)			IEC 60250
Dissipation Factor (100 Hz)			IEC 60250
Arc Resistance		sec	ASTM D495
Arc Resistance (PLC)			ASTM D495
Electric Strength (0.0394 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0181 in, Black, Suffix H
0.0319 in, Natural, Green, & Black
0.0591 in, All colors
Additional Information
Post Shrinkage, ISO 2577, Injection molding, Flow, 168h, 110°C: 0.5% Post Shrinkage, ISO 2577, Compression molding, Flow, 168h, 110°C: 0.4% Molding Shrinkage, ISO 2577, Flow, Injection molding: 0.65% Molding Shrinkage, ISO 2577, Flow, Compression molding: 0.35% Maximum Application Temperature, IEC 60216-P1/ DIN IEC 216-T1, <50h²: 200°C Maximum Application Temperature, IEC 60216-P1/ DIN IEC 216-T1, <20000h²: 150°C Proof Track Index, IEC 60112/ DIN IEC 112, Test liquid A: 175 PTI Arc Resistance, ASTM D495: 130 to 135 sec Water Absorption, ISO 62, 24h/23°C: 50 mg
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bakelite® PF 2736, Bakelite PF 2736, Bakelite® , Bakelite, BakelitePF2736, PF 2736, PF2736, Phenol Formaldehyde Resin, PF, Phenolic, Hexion GmbH, PhenolFormaldehydeResin, 2736PF
Features
Features may also be described by the following terms: Good Electrical Properties, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage.

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

Bakelite® PF 2736

Phenol Formaldehyde Resin

Supplied by Hexion Specialty Chemicals GmbH