Already have an account? Login Here

IDES

Bakelite® PF 14694

Phenol Formaldehyde Resin

Supplied by Hexion Specialty Chemicals GmbH

The technical datasheet with complete property values for Bakelite® PF 14694 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Features	Good Surface Finish
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Apparent Density		g/cm³	ISO 60
Molding Shrinkage - Flow		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus		psi	ISO 178
Flexural Strength²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/2eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/2eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1160 psi, Unannealed)		°F	ISO 75-2/C
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity (100 Hz)			IEC 60250
Dissipation Factor (100 Hz)			IEC 60250
Additional Information
Post Shrinkage, ISO 2577, Injection molding, Flow, 168h, 110°C: 0.6% Post Shrinkage, ISO 2577, Compression molding, Flow, 168h, 110°C: 0.6% Molding Shrinkage, ISO 2577, Flow, Injection molding: 0.65% Molding Shrinkage, ISO 2577, Flow, Compression molding: 0.65% Water Absorption, ISO 62, 24h/23°C: 80 mg
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bakelite® PF 14694, Bakelite PF 14694, Bakelite® , Bakelite, BakelitePF14694, PF 14694, PF14694, Phenol Formaldehyde Resin, PF, Phenolic, Hexion GmbH, PhenolFormaldehydeResin, 14694PF
Features
Features may also be described by the following terms: Good Surface Finish.

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min