IDES Prospector Already have an account? Login Here

IDES

WPP PP PPC6TF2UV-848 Black

Polypropylene Copolymer

Talc Filler, 20%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PP PPC6TF2UV-848 Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Properties shown below for this filled blend are typical for a 20% talc-reinforced polypropylene copolymer. Other products available to meet specific requirements.

Features and Options:
  • Good balance of physical properties
  • UV Stabilized
  • Custom versions of this compound are available.
  • Some custom colors available.
  • Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Good UV Resistance
Automotive Specifications 
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Flexural Modulus - Secant 2 (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Instrumented Dart Impact
     ASTM D3763
14°F
in·lb
  
73°F
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Annealed
°F
 ISO 75-2/A
Additional Information
Filler Content, ISO 3451: 20%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPC6TF2UV-848 Black, WPP PP PPC6TF2UV848 Black, WPP PP , WPPPPPPC6TF2UV848Black, WPPPP, PPC 6 TF 2 UV, PPPPC 6 TF 2 UV 848 Black, PPPPC 6 TF 2 UV, PPC6TF2UV, PPPPC6TF2UV-848 Black, PPPPC6TF2UV848 Black, PPPPC6TF2UV:848 Black, PPPPC6TF2UV/848 Black, PPPPC6TF2UV+848 Black, PPPPC6TF2UV_848 Black, PPPPC6TF2UV 848 Black, PPPPC6, PPPPC6TF2UV, PPC 6 TF 2 UV 848 Black, PPPPC6TF2UV848Black, PPC6TF2UV-848 Black, PPC6TF2UV848 Black, PPC6TF2UV:848 Black, PPC6TF2UV/848 Black, PPC6TF2UV+848 Black, PPC6TF2UV_848 Black, PPC6TF2UV 848 Black, PPC6, 6TF, TF2, 2UV, UV848, 848Black, PPPPC6TF2UV_848Black, PPC6TF2UV848Black, PPC6TF2UV_848Black, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Washington Penn, PolypropyleneCopolymer, PPCopolymer, 6PPC, 6PPPPC
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.