IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 150

Polypropylene Impact Copolymer

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 150 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 150 Performance Polymer is a high impact copolymer, primarily designed for high impact resistance even at very low temperatures. It presents a ductile behaviour at -40°C and is particularly well suited for injection moulded large part containers and boxes.

Complies with:
  • European Commission Regulation (EU) No 10/2011
  • U.S. FDA FCN 843
Consult the regulations complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-40°F
ft·lb/in²
  
-22°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Instrumented Dart Impact 2 (-40°F, Peak Energy, Ductile)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 150, INSPIRE 150, INSPIRE™ , INSPIRE, INSPIRE150, 150, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Braskem EU, PolypropyleneImpactCopolymer, PPImpactCopolymer
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
222.0 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.