IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 114 EU

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 114 EU is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 114 Performance Polymer EU is a propylene based resin very suitable for extrusion applications including blown film, sheet, profiles, pipe and blow molding.

INSPIRE™ 114 Performance Polymer EU has a very high stiffness and excellent impact resistance, even at low temperatures. INSPIRE™ 114 Performance Polymer EU combines outstanding mechanical properties with superior processability due to its high melt strength.

INSPIRE™ 114 Performance Polymer EU has improved swell and sag properties compared to conventional polypropylenes.

Applications for INSPIRE™ 114 Performance Polymer EU:
  • Film applications
  • Sheet and profile extrusion
  • Thermoforming
  • Pipes
  • Blow molding

Complies with:
  • U.S. FDA FCN 843
Consult the regulations for complete details
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature 2
°F
 ISO 306/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 114 EU, INSPIRE 114 EU, INSPIRE™ , INSPIRE, INSPIRE114EU, 114 EU, 114EU, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified, EU114
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.