IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 364

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 364 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 364 Performance Polymer has been developed for thin wall injection moulding applications.
INSPIRE™ 364 Performance Polymer is characterized by:
  • Improved taste and odor performance
  • Good balance of stiffness and impact properties
  • Good optical properties,
  • Good processability.

Applications for INSPIRE™ 364 Performance Polymer:
  • Thin wall injection moulding
  • Housewares
  • Media packaging
  • Caps and closures

Regulatory Information:
INSPIRE™ 364 Performance Polymer should comply with:
  • U.S. FDA 21 CFR 177.1520(c)3.1a
  • European Commission Regulation (EU) No 10/2011
  • Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature 2
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Haze (Injection Molded)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 364, INSPIRE 364, INSPIRE™ , INSPIRE, INSPIRE364, 364, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.