IDES Prospector Already have an account? Login Here

IDES

Luranyl® HT 220E

Polyphenylene Ether + Nylon 66

Supplied by ROMIRA GmbH

The technical datasheet with complete property values for Luranyl® HT 220E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPE+PA Blend; extrusion and injection moulding grade; very high heat resistance
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Heat Resistance
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Break, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luranyl® HT 220E, Luranyl HT 220E, Luranyl® , Luranyl, LuranylHT220E, HT 220 E, HT 220E, HT220, 220E, HT220E, Polyphenylene Ether + Nylon 66, Polyphenylene Ether Nylon 66, Polyphenylene Ether : Nylon 66, Polyphenylene Ether / Nylon 66, Polyphenylene Ether - Nylon 66, Polyphenylene Ether _ Nylon 66, Polyphenylene Ether Nylon 66, PPE+Nylon 66, PPENylon 66, PPE:Nylon 66, PPE/Nylon 66, PPE-Nylon 66, PPE_Nylon 66, PPE Nylon 66, Polyphenylene Ether, PPE, Romira Euro, PolyphenyleneEtherNylon66, PPENylon66, PolyphenyleneEther, PolyphenyleneEther_Nylon66, PPE_Nylon66, 220HT
Features
Features may also be described by the following terms: High Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Screw Speed
rpm
  
Injection Notes
Maximum Residence Time: 4 to 10 min
Injection Pressure: moderate to high
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.