Niplene F50 AGR Soredi Polypropylene Homopolymer (Glass Fiber Reinforcement, 50%)

Product Description

Polypropylene homopolymer, reinforced with 50% glass fibre chemically coupled to the polymeric matrix

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage			ASTM D955
Flow		in/in
Across Flow		in/in
Water Absorption (Equilibrium, 73°F, 50% RH)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus³		psi	ASTM D790
Flexural Strength³ (Break)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-4°F, 0.126 in		ft·lb/in
73°F, 0.126 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525⁴
CLTE - Flow (73 to 131°F)		in/in/°F	ISO 11359-2
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity (1 MHz)			IEC 60250
Dissipation Factor (1 MHz)			IEC 60250
Electric Strength (0.0394 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niplene F50 AGR, Niplene , NipleneF50AGR, F 50 AGR, F50 AGR, F50, 50AGR, F50AGR, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Soredi, PolypropyleneHomopolymer, PPHomopolymer, 50F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³0.051 in/min

⁴Rate B (120°C/h), Loading 2 (50 N)

Niplene F50 AGR