IDES Prospector Already have an account? Login Here

IDES

Niplene C20

Polypropylene Homopolymer

Calcium Carbonate Filler, 20%

Supplied by Soredi S.p.a.

The technical datasheet with complete property values for Niplene C20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polypropylene homopolymer, filled with 20% calcium carbonate, for the injection moulding of aesthetical items.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Calcium Carbonate Filler, 20% Filler by Weight
Features 
  • Good Surface Finish
  • Homopolymer
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3 (Break)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niplene C20, Niplene , NipleneC20, C 20, C20, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Soredi, PolypropyleneHomopolymer, PPHomopolymer, 20C
Features
Features may also be described by the following terms: Good Surface Finish.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
4Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.