Niplene T10 Soredi Polypropylene Homopolymer (Talc Filler, 10%)

Product Description
Polypropylene homopolymer, talc filled at 10%, suitable for injection moulding.
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Talc Filler, 10% Filler by Weight
Features	Homopolymer
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Yield)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus³		psi	ASTM D790
Flexural Strength³ (Break)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525⁴
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity (1 MHz)			IEC 60250
Dissipation Factor (1 MHz)			IEC 60250
Electric Strength (0.0394 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niplene T10, Niplene , NipleneT10, T 10, T10, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Soredi, PolypropyleneHomopolymer, PPHomopolymer, 10T

Notes

¹Typical properties: these are not to be construed as specifications.

²2.0 in/min

³0.051 in/min

⁴Rate B (120°C/h), Loading 2 (50 N)

Niplene T10