IDES Prospector Already have an account? Login Here

IDES

Romiloy® 4010/07

Acrylonitrile Butadiene Styrene + Nylon

Supplied by ROMIRA GmbH

The technical datasheet with complete property values for Romiloy® 4010/07 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Impact Resistance
  • High Stiffness
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Break, 73°F)
%
 ISO 527-2/50
Flexural Modulus 2 (73°F)
psi
 ISO 178
Flexural Strength 2 (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
Tensile Strain @ Break, DIN EN ISO 527, 50 mm/min, 23°C: >100%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Romiloy® 4010/07, Romiloy 401007, Romiloy® , Romiloy, Romiloy401007, 4010, 4010/07, 401007, 4010:07, 4010+07, 4010-07, 4010_07, 4010 07, Acrylonitrile Butadiene Styrene + Nylon, Acrylonitrile Butadiene Styrene Nylon, Acrylonitrile Butadiene Styrene : Nylon, Acrylonitrile Butadiene Styrene / Nylon, Acrylonitrile Butadiene Styrene - Nylon, Acrylonitrile Butadiene Styrene _ Nylon, Acrylonitrile Butadiene Styrene Nylon, ABS+Nylon, ABSNylon, ABS:Nylon, ABS/Nylon, ABS-Nylon, ABS_Nylon, ABS Nylon, Acrylonitrile Butadiene Styrene, ABS, Romira Euro, AcrylonitrileButadieneStyreneNylon, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_Nylon, 074010
Features
Features may also be described by the following terms: High Impact Resistance, High Stiffness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Holding Pressure: moderate to high
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.