IDES Prospector Already have an account? Login Here

IDES

Niblan F20 AE/V0

Polybutylene Terephthalate

Glass Fiber Reinforcement, 20%

Supplied by Soredi S.p.a.

The technical datasheet with complete property values for Niblan F20 AE/V0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PBT 20% glass fibre reinforced, flame retardant UL officially certified by Underwriter Laboratories (yellow card) as per UL 94 V0 at 1.6 mm rating.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Flame Retardant
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus 2
psi
 ASTM D790
Flexural Strength 2 (Break)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niblan F20 AE/V0, Niblan F20 AEV0, Niblan , NiblanF20AEV0, F 20 AE, F20 AE, F 20 AE V 0, F20AE, F20 AE/V0, F20 AEV0, F20 AE:V0, F20 AE+V0, F20 AE-V0, F20 AE_V0, F20 AE V0, F20, 20AE, AEV, V0, F20AEV0, F20AE_V0, Polybutylene Terephthalate, PBT, Polyester, Soredi, PolybutyleneTerephthalate, 20F
Notes
1Typical properties: these are not to be construed as specifications.
20.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.