IDES Prospector Already have an account? Login Here

IDES

Niblan V100 AE/V0

Polybutylene Terephthalate

Supplied by Soredi S.p.a.

The technical datasheet with complete property values for Niblan V100 AE/V0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced PBT, flame retardant UL official certified by underwriters laboratories (yellow card) As per UL 94 V0 at 1,6 mm rating
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Flame Retardant
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3 (Break)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-8°F, 0.126 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (1 MHz)
 
 IEC 60250
Dissipation Factor (1 MHz)
 
 IEC 60250
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Additional Information
Volume Resistivity, IEC 60093: >1E15 ohm-cm
Surface Resistivity, IEC 60093: >1E15 ohms
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niblan V100 AE/V0, Niblan V100 AEV0, Niblan , NiblanV100AEV0, V 100 AE, V100 AE, V 100 AE V 0, V100AE, V100 AE/V0, V100 AEV0, V100 AE:V0, V100 AE+V0, V100 AE-V0, V100 AE_V0, V100 AE V0, V100, 100AE, AEV, V0, V100AEV0, V100AE_V0, Polybutylene Terephthalate, PBT, Polyester, Soredi, PolybutyleneTerephthalate, 100V
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.