IDES Prospector Already have an account? Login Here

IDES

Ecotan B F15 FL NERO

Polyamide 6

Glass Fabric Reinforcement, 15%

Supplied by Soredi S.p.a.

The technical datasheet with complete property values for Ecotan B F15 FL NERO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide 6 black, reinforced with 15% glass fiber.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fabric Reinforcement, 15% Filler by Weight
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
%
 ISO 294-4
Water Absorption
     ASTM D570
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Break)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 2
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Additional Information
The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with ISO 2577.
Limit Temperature, IEC 216, 20000 hrs: 100°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ecotan B F15 FL NERO, Ecotan B , EcotanBF15FLNERO, EcotanB, BF 15 FL NERO, BF15 FL NERO, BF15, F 15 FL NERO, BF15FLNERO, F15 FL NERO, F15, 15FL, FLNERO, F15FLNERO, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Soredi, Polyamide6, Nylon6, 15F, 15BF
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.