Ecotan B F30 FL CB NAT Soredi Polyamide 6 (Glass Fabric Reinforcement, 30%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fabric Reinforcement, 30% Filler by Weight
Additive	Titanium Dioxide (TiO2)
Features	General Purpose
Appearance	Natural Color
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage		%	ISO 294-4
Water Absorption (73°F, 24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength (Break)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525²
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index		V	IEC 60112
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Additional Information
The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with ISO 2577. Limit Temperature, IEC 216, 20000 hrs: 100°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ecotan B F30 FL CB NAT, Ecotan B , EcotanBF30FLCBNAT, EcotanB, BF 30 FL CB NAT, BF30 FL CB NAT, BF30, F 30 FL CB NAT, BF30FLCBNAT, F30 FL CB NAT, F30, 30FL, FLCB, CBNAT, F30FLCBNAT, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Soredi, Polyamide6, Nylon6, 30F, 30BF
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate B (120°C/h), Loading 2 (50 N)

Ecotan B F30 FL CB NAT