IDES Prospector Already have an account? Login Here

IDES

Niretan B S25 AE/V0

Polyamide 6

Glass Bead, 25%

Supplied by Soredi S.p.a.

The technical datasheet with complete property values for Niretan B S25 AE/V0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyamide 6 filled with 25% glass beads, flame retardant as per UL 94 norm V0 at 1.6 mm rating. Suitable for the injection moulding of pieces with isotropic characteristics.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 25% Filler by Weight
Features 
  • Flame Retardant
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
--
 
 ASTM D792
Molding Shrinkage - Flow
--
in/in
 ASTM D955
Water Absorption
       ASTM D570
73°F, 24 hr
--
%
  
Equilibrium, 73°F, 50% RH
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3 (Break)
--
psi
 ASTM D790
Impact
Dry
Conditioned
Unit
Test Method
Notched Izod Impact
       ASTM D256
-4°F, 0.126 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (R-Scale)
--
 
 ASTM D785
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
--
°F
 ASTM D648
Peak Crystallization Temperature (DSC)
--
°F
 ASTM D3418
CLTE - Flow (73 to 131°F)
--
in/in/°F
 ISO 11359-2
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (1 MHz)
 
 IEC 60250
Dissipation Factor (1 MHz)
 
 IEC 60250
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
       UL 94
0.0630 in
--
 
  
0.126 in
--
 
  
Glow Wire Ignition Temperature (0.0787 in)
--
°F
 IEC 60695-2-13
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niretan B S25 AE/V0, Niretan B S25 AEV0, Niretan B , NiretanBS25AEV0, NiretanB, S 25 AE, BS 25 AE V 0, BS 25 AE, S25 AE, BS25 AE/V0, BS25 AEV0, BS25 AE:V0, BS25 AE+V0, BS25 AE-V0, BS25 AE_V0, BS25 AE V0, BS25, BS25 AE, S 25 AE V 0, S25AE, BS25AEV0, BS25AE, S25 AE/V0, S25 AEV0, S25 AE:V0, S25 AE+V0, S25 AE-V0, S25 AE_V0, S25 AE V0, S25, 25AE, AEV, V0, BS25AE_V0, S25AEV0, S25AE_V0, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Soredi, Polyamide6, Nylon6, 25S, 25BS
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Niretan B S25 AE/V0, Niretan B S25 AEV0, Niretan B , NiretanBS25AEV0, NiretanB, S 25 AE, BS 25 AE V 0, BS 25 AE, S25 AE, BS25 AE/V0, BS25 AEV0, BS25 AE:V0, BS25 AE+V0, BS25 AE-V0, BS25 AE_V0, BS25 AE V0, BS25, BS25 AE, S 25 AE V 0, S25AE, BS25AEV0, BS25AE, S25 AE/V0, S25 AEV0, S25 AE:V0, S25 AE+V0, S25 AE-V0, S25 AE_V0, S25 AE V0, S25, 25AE, AEV, V0, BS25AE_V0, S25AEV0, S25AE_V0, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Soredi, Polyamide6, Nylon6, 25S, 25BS

Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.