IDES Prospector Already have an account? Login Here

IDES

ColorFast™ FRA202

Acrylonitrile Butadiene Styrene

Supplied by LTL Color Compounders, Inc.

The technical datasheet with complete property values for ColorFast™ FRA202 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
General purpose V0/5VA-rated ABS
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • General Purpose
 
Uses 
  • General Purpose
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0.125 in)
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus 2
psi
ASTM D790
Flexural Strength 2
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.250 in)
°F
ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0591 in
 
 
0.102 in
 
 
UL File Number
 
 
UL
Nominal Value
Unit
Test Method
Hot-wire Ignition (HWI) (PLC)
    UL 746
0.0591 in
 
 
0.118 in
 
 
High Amp Arc Ignition (HAI) (PLC)
    UL 746
0.0591 in
 
 
0.118 in
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ColorFast™ FRA202, ColorFast FRA202, ColorFast™ , ColorFast, ColorFastFRA202, FRA 202, FRA202, Acrylonitrile Butadiene Styrene, ABS, LTL Color, AcrylonitrileButadieneStyrene, 202FRA
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Drying Time, Maximum
hr
 
Suggested Shot Size
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.