DISTRUMID 6 HI LT Distrupol Polyamide 6

Product Description

Polyamide 6, high impact resistance also at low temperatures, for injection moulding.

General

Material Status

Availability

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage (73°F)		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Yield, 73°F)		psi	ISO 527-2/500
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Melting Temperature (DSC)		°F	ISO 3146
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0315 in)			UL 94
Additional Information
The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with ISO 2577. Melting Point, DSC: 220 ± 2 °C Tensile Strain at Break, ISO 527, 23°C, 50 mm/min: >50%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DISTRUMID 6 HI LT, DISTRUMID , DISTRUMID6HILT, 6 HI LT, 6HI, HILT, 6HILT, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Distrupol, Polyamide6, Nylon6, HI6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

DISTRUMID 6 HI LT