IDES Prospector Already have an account? Login Here

IDES

Amodel® A-1133 NL WH 886

Polyphthalamide

Glass Fiber Reinforcement

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Amodel® A-1133 NL WH 886 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Amodel A-1133 NL WH 886 resin is a glass reinforced polyphthalamide (PPA ) which is distinguished by its high-reflectivity white color. This grade features a high deflection temperature for compatibility with SMT processes, and low moisture absorption.


  • White: A-1133 NL WH 886
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Good Chemical Resistance
  • Good Color Stability
  • High Reflectivity
  • Low Moisture Absorption
  
Uses 
  • Automotive Electronics
  • LEDs
  
RoHS Compliance 
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Poisson's Ratio
 
 ASTM E132
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
 ASTM D570
CLTE
      
Flow: 32 to 212°F
in/in/°F
 ASTM E831
Flow: 320 to 480°F
in/in/°F
 ASTM E831
Transverse: 32 to 212°F
in/in/°F
 ASTM E228
Transverse: 320 to 480°F
in/in/°F
 ASTM E228
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® A-1133 NL WH 886, Amodel A1133 NL WH 886, Amodel® , Amodel, AmodelA1133NLWH886, A-1133 NL WH 886, A1133 NL WH 886, A:1133 NL WH 886, A/1133 NL WH 886, A+1133 NL WH 886, A_1133 NL WH 886, A 1133 NL WH 886, A1133, 1133NL, NLWH, WH886, A1133NLWH886, A_1133NLWH886, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 1133A
Features
Features may also be described by the following terms: Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Reflectivity, Good Color Stability, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: L.E.D., LED.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.