Amodel A-1130 FW Solvay Specialty Polyphthalamide (Glass Fiber Reinforcement, 30%)

Product Description

Amodel A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications.

Black: A-1130 FW BK 324

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

PTFE Lubricant

Features

Good Chemical Resistance

Good Creep Resistance

Good Dimensional Stability

Good Stiffness

Good Wear Resistance

High Strength

Low Friction

Uses

Bearings

Bushings

Filters

Gears

RoHS Compliance

Automotive Specifications

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature		°F	ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Amodel® A-1130 FW, Amodel A1130 FW, Amodel® , Amodel, AmodelA1130FW, A-1130 FW, A1130 FW, A:1130 FW, A/1130 FW, A+1130 FW, A_1130 FW, A 1130 FW, A1130, 1130FW, A1130FW, A_1130FW, Polyphthalamide, PPA, Polyamide, Nylon, Solvay Specialty, 1130A
Features
Features may also be described by the following terms: Low Friction, High Strength, Good Chemical Resistance, Chemical Resistant, Good Creep Resistance, Creep Resistant, Good Dimensional Stability, Dimensionally Stable, Good Stiffness, Good Wear Resistance, Wear Resistant.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ISO (1), ASTM (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Amodel® A-1130 FW

Polyphthalamide

Glass Fiber Reinforcement, 30%

Supplied by Solvay Specialty Polymers