Iupital MF3020 Mitsubishi EP Acetal (POM) Copolymer (Milled Glass Fiber, 20%)

General

Material Status

Availability

Filler / Reinforcement

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow (0.118 in)		%
Water Absorption² (Equilibrium, 73°F, 50% RH)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature		°F	ISO 11357-3
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0315 in)			UL 94
Related Terminology
This supplier and product may also be known by these terms: Lupital, Jupital Product names can be difficult to match. You may have searched any one of these terms to find this product: Iupital® MF3020, Iupital MF3020, Iupital® , Iupital, IupitalMF3020, MF 3020, MF3020, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Mitsubishi EP, AcetalPOMCopolymer, 3020MF

Notes

¹Typical properties: these are not to be construed as specifications.

²60% RH

Iupital® MF3020