IDES Prospector Already have an account? Login Here

IDES

HIPOLEN P® FL 6C

Polypropylene Homopolymer

Supplied by HIPOL A.D.

The technical datasheet with complete property values for HIPOLEN P® FL 6C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hipolen® P FL 6C is a homopolymer, suitable for Biaxially oriented films.

Typical applications of Hipolen® P FL 6C are BOPP, packaging film for food, film suitable for lacquering.

Hipolen® P FL 6C has a wide range of approval for contact with food but for specific applications, reference should be made to Hipol chemical industry.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Food Contact Acceptable
  • Good Processability
  • Homopolymer
Uses 
  • Bi-axially Oriented Film
  • Film
  • Food Packaging
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPOLEN P® FL 6C, HIPOLEN P FL 6C, HIPOLEN P® , HIPOLEN P, HIPOLENPFL6C, HIPOLENP, FL 6 C, FL 6C, FL6, 6C, FL6C, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Hipol, PolypropyleneHomopolymer, PPHomopolymer, 6FL
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Food Packaging, Bi-axially Oriented Film, Biaxially Oriented Film.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Melt temperature tubular film: 210 to 250°C
Stretch oven temperature: 150 to 160°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.