IDES Prospector Already have an account? Login Here

IDES

OxyShield® Plus 1500

Polyamide 6

Supplied by Honeywell

The technical datasheet with complete property values for OxyShield® Plus 1500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OxyShield® Plus 1500 is a 15 micron biaxially oriented nylon film having a very high barrier to oxygen and other gases. The film provides excellent mechanical properties at high and low temperatures and excellent toughness and puncture resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Barrier Resin
  • Good Toughness
  • Puncture Resistant
Uses 
  • Bi-axially Oriented Film
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Metal - Dynamic
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 0.59 mil
psi
  
TD: 0.59 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 0.59 mil
psi
  
TD: Break, 0.59 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.59 mil
%
  
TD: Break, 0.59 mil
%
  
Oxygen Permeability
     ASTM D3985
77°F, 0.59 mil, 0% RH
cm³·mil/100in²/atm/24 hr
  
77°F, 0.59 mil, 65% RH
cm³·mil/100in²/atm/24 hr
  
Water Vapor Transmission Rate (100°F, 0.59 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.591 mil)
 
 ASTM D2457
Haze (0.591 mil)
%
 ASTM D1003
Additional Information
Yield: 40189 in²/lb
Tensile Strength @ Break, ASTM D 882, MD: 35000 to 44000 psi
Tensile Strength @ Break, ASTM D 882, TD: 40000 to 50000 psi
Elongation @ Break, ASTM 882, MD: 110 to 130%
Elongation @ Break, ASTM 882, TD: 80 to 100%
Secant Modulus, ASTM D 882, MD: 320000 to 420000 psi
Secant Modulus, ASTM D 882, TD: 255000 to 355000 psi
Coefficient of Friction, ASTM D 1894: 0.4 to 0.6 vs Itself-Dynamic
Coefficient of Friction, ASTM D 1894: 0.1 to 0.3 vs Metal-Dynamic
Dimensional Stability, ASTM D1204, MD, 320°F, 5min: 1.5 to 2.5% shrinkage
Dimensional Stability, ASTM D1204, TD, 320°F, 5min: 1.0 to 2.0% shrinkage
Corona Treatment, ASTM D5946, treated side: 54 to 56 dynes/cm
Corona Treatment, ASTM D5946,untreated side: 48 to 50 dynes/cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OxyShield® Plus 1500, OxyShield Plus 1500, OxyShield® Plus , OxyShield Plus, OxyShieldPlus1500, OxyShieldPlus, Plus 1500, Plus1500, Plus, 1500, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Honeywell, Polyamide6, Nylon6, 1500Plus
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Puncture Resistance, Puncture Resistant.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.