HIPOLEN P TA 41 Hipol Polypropylene Homopolymer

Product Description

Hipolen® P TA 41 is a homopolymer, suitable for extrusion of textile fibers. It is formulated with additives for good heat stability.

Typical applications of Hipolen® P TA 41 are Staple fiber , Continuous filament ( BCF; FDY)

Hipolen® P TA 41 has a wide range of approval for contact with food but for specific applications, reference should be made to Hipol chemical industry.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Europe

Features

High Tensile Strength

Homopolymer

Medium Molecular Weight

Uses

BCF Multifilaments

Fibers

Staple Fibers

Forms

Pellets

Processing Method

Fiber (Spinning) Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638
Tensile Elongation			ASTM D638
Yield		%
Break		%
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Vicat Softening Temperature		°F	ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPOLEN P® TA 41, HIPOLEN P TA 41, HIPOLEN P® , HIPOLEN P, HIPOLENPTA41, HIPOLENP, TA 41, TA41, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Hipol, PolypropyleneHomopolymer, PPHomopolymer, 41TA
Features
Features may also be described by the following terms: Medium Molecular Weight, Medium MW, High Tensile Strength.
Uses
Uses may also be described by the following terms: Staple Fibers, Staple Fiber, BCF Multifilaments, BCF Multi-filaments.

Notes

¹Typical properties: these are not to be construed as specifications.

HIPOLEN P® TA 41

Polypropylene Homopolymer

Supplied by HIPOL A.D.