IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 22D730

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 22D730 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
22D730 is an autoclave, low density polyethylene grade for film application. 22D730 is developed to give an extra strong film for heavy duty film applications such as sacks and pallet shrink.
Applications
22D730 is intended for applications such as
  • Heavy duty bags
  • Shrink films
  • Liners
  • Construction and agricultural films
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Autoclavable
Uses 
  • Agricultural Applications
  • Construction Applications
  • Film
  • Heavy-duty Bags
  • Liners
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882A
0.05% to 1.05%, MD: 4.9 mil
psi
  
0.05% to 1.05%, TD: 4.9 mil
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 4.9 mil
psi
  
TD: Yield, 4.9 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 4.9 mil
%
  
TD: Break, 4.9 mil
%
  
Dart Drop Impact (4.9 mil)
g
 ISO 7765-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 4.92 mil)
 
 ASTM D2457
Haze (4.92 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 22D730, INEOS LDPE , INEOSLDPE22D730, INEOSLDPE, LDPE 22 D 730, LDPE22D730, LDPE22, LDPE, 22 D 730, 22D730, 22D, D730, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, D22, 22LDPE
Features
Features may also be described by the following terms: Autoclavable, Autoclave.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.