IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 22G764

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 22G764 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
22G764 is an autoclave, low density polyethylene grade developed to give strong film for medium duty applications.
Applications
22G764 is intended for applications such as
  • Thin shrink film
  • Carrier-bag films
  • Pouches and refuse sacks
  • General packaging film
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock (850 ppm) 1
  • Antioxidant
  
Features 
  • Antiblocking
  • Antioxidant
  • Autoclavable
Uses 
  • Film
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882A
MD: 1.6 mil
psi
  
TD: 1.6 mil
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 1.6 mil
psi
  
TD: Yield, 1.6 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ISO 7765-1
Elmendorf Tear Strength - MD (1.6 mil)
lbf
 ISO 6383-2
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.57 mil)
 
 ASTM D2457
Haze (1.57 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 22G764, INEOS LDPE , INEOSLDPE22G764, INEOSLDPE, LDPE 22 G 764, LDPE22G764, LDPE22, LDPE, 22 G 764, 22G764, 22G, G764, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, G22, 22LDPE
Features
Features may also be described by the following terms: Autoclavable, Autoclave, Antiblocking, Unspecified Antiblock.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Talc
2Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.