IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 22H760

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 22H760 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
22H760 is an autoclave, low density polyethylene grade for the production of thin blown films.
Applications
22H760 is intended for applications such as
  • Thin shrink film
  • Thin pouches
  • General packaging film
  • Bubble film and foam
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Autoclavable
  
Uses 
  • Bags
  • Film
  • Foam
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Puncture Energy (1.6 mil)
in·lb
  
Film Puncture Force (1.6 mil)
lbf
  
Tensile Stress
     ISO 527-3
MD: Yield, 1.6 mil
psi
  
TD: Yield, 1.6 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ISO 7765-1
Elmendorf Tear Strength
     ISO 6383-2
MD: 1.6 mil
lbf
  
TD: 1.6 mil
lbf
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature (DSC)
°F
 ISO 3146
Optical
Nominal Value
Unit
Test Method
Gloss (1.57 mil)
 
 ASTM D2457
Haze (1.57 mil)
%
 ASTM D1003
Additional Information
Tensile Modulus, ASTM D882-A, MD, 40µ: 200 MPa
Tensile Modulus, ASTM D882-A, TD, 40µ: 210 MPa
Coefficient of Friction, ISO 8295, dynamic, 40µ: 0.9
The value listed as Melting Point ISO 3146, was tested in accordance with ISO 11357/03.
The value listed as Elmendorf Tear Strength ISO 6383-2, was tested in accordance with ISO 8483/2
The values listed as Film Puncture Energy and Force, were tested in accordance with ASTM D5748.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 22H760, INEOS LDPE , INEOSLDPE22H760, INEOSLDPE, LDPE 22 H 760, LDPE22H760, LDPE22, LDPE, 22 H 760, 22H760, 22H, H760, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, H22, 22LDPE
Features
Features may also be described by the following terms: Autoclavable, Autoclave.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.