IDES Prospector Already have an account? Login Here

IDES

Elexar® EL-1934F

Styrene Ethylene Butylene Styrene Block Copolymer

Supplied by Teknor Apex Company

The technical datasheet with complete property values for Elexar® EL-1934F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Flame Retardant
Uses 
  • Appliance Wire Insulation
  • Appliance Wire Jacketing
  • Cable Jacketing
  • Connectors
  • Flexible Cord Jacketing
  • Industrial Cable Insulation
  • Terminal Cable Jacketing
  • Underground Power Cable
  • Wire & Cable Applications
  • Wire Jacketing
RoHS Compliance 
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (277°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air (277°F, 168 hr)
%
 ASTM D573
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
 
 ASTM D150
Dissipation Factor
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0600 in)
 
 UL 94
Oxygen Index
%
 ASTM D2863
Additional Information
Maximum Continuous Operating Temp, UL-1581: 105°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elexar® EL-1934F, Elexar EL1934F, Elexar® , Elexar, ElexarEL1934F, EL, EL 1934 F, EL-1934F, EL1934F, EL:1934F, EL/1934F, EL+1934F, EL_1934F, EL 1934F, EL1934, 1934F, Styrene Ethylene Butylene Styrene Block Copolymer, SEBS, Thermoplastic Elastomer, TPE, Teknor Apex, StyreneEthyleneButyleneStyreneBlockCopolymer, ThermoplasticElastomer, 1934EL
Uses
Uses may also be described by the following terms: Appliance Wire Insulation, Industrial Cable Insulation, Appliance Wire Jacketing, Flexible Cord Jacketing, Terminal Cable Jacketing, Wire and Cable Applications, Wire & Cable Applications.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Injection Notes
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw Speed: 30 to 100 rpm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.