IDES Prospector Already have an account? Login Here

IDES

INEOS PP 241-NA02

Polypropylene Random Copolymer

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS PP 241-NA02 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
241-NA02 is a propylene-ethylene copolymer film resin without slip or antiblock additives, suitable for the manufacturing of unoriented films on blown film lines.
241-NA02 is characterized by :
  • High gloss, low haze
  • Low sealing initiation temperature
  • Good mechanical properties
  • Heat sterilisable
  • Excellent film appearance
Applications
241-NA02 is especially suitable for:
  • Transparent packaging film (e.g. FFS)
  • Sealing layer in coextrusions
  • Textile packaging
  • Food packaging
  • Lamination film
  • Label film
  • Technical and protection film
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Surface Finish
  • High Gloss
  • Low Temperature Heat Sealability
  • Random Copolymer
  • Steam Sterilizable
Uses 
  • Film
  • Food Packaging
  • Laminates
  • Packaging
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus (73°F)
psi
 ISO 178
Coefficient of Friction (vs. Itself - Static)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Strength
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Dart Drop Impact (2.0 mil, Blown Film)
g
 ISO 7765-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature (DSC)
°F
 ISO 3146
Optical
Nominal Value
Unit
Test Method
Gloss (20°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP 241-NA02, INEOS PP 241NA02, INEOS PP , INEOSPP241NA02, INEOSPP, PP 241 NA 02, PP 241, 241, PP241-NA02, PP241NA02, PP241:NA02, PP241/NA02, PP241+NA02, PP241_NA02, PP241 NA02, PP241, 241 NA 02, 241-NA02, 241NA02, 241:NA02, 241/NA02, 241+NA02, 241_NA02, 241 NA02, 241NA, NA02, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Ineos Polyolefins, PolypropyleneRandomCopolymer, PPRandomCopolymer, NA241, 241PP
Features
Features may also be described by the following terms: Random Copolymer, Low Temperature Heat Sealability, Low Temperature Heat Seal, Steam Sterilization, Steam Sterilizable, Good Surface Finish, High Gloss.
Uses
Uses may also be described by the following terms: Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.