Optema TC 141 Molding ExxonMobil Ethylene Methyl Acrylate Copolymer

Product Description

OPTEMA TC 141 is a high flow, 21.5 wt% methyl acrylate copolymer which can be used in specialty applications such as a carrier for color and additive master batches, a compatibilizer in polymer compounds, hot melt adhesives and carpet backing. It can be processed at temperatures as low as 200°F (93°C) and as high as 600°F (315°C).

General

Material Status

Commercial: Active

Availability

Latin America

North America

South America

Additive

Heat Stabilizer

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Methyl Acrylate Content		wt%	ExxonMobil Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A, 15 sec
Shore D, 15 sec
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES Product names can be difficult to match. You may have searched any one of these terms to find this product: Optema™ TC 141 Molding, Optema TC 141 Molding, Optema™ , Optema, OptemaTC141Molding, TC 141 Molding, TC141, 141Molding, TC141Molding, Ethylene Methyl Acrylate Copolymer, EMA, Thermoplastic Elastomer, TPE, ExxonMobil, EthyleneMethylAcrylateCopolymer, ThermoplasticElastomer, 141TC

Notes

¹Typical properties: these are not to be construed as specifications.

Optema™ TC 141 Molding

Ethylene Methyl Acrylate Copolymer Resin

Supplied by ExxonMobil Chemical