Latamid® 6 BH Lati Polyamide 6

Product Description

Polyamide 6 (PA 6).
High fluidity. Thermally stabilised. Product UL certified.
Very high fluidity.

General

Material Status

Availability

Additive

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2/1
73°F		psi
140°F		psi
194°F		psi
248°F		psi
302°F		psi
Tensile Stress			ISO 527-2/5
Yield, 73°F		psi
Break, 73°F		psi
Tensile Strain			ISO 527-2/5
Yield, 73°F		%
Break, 73°F		%
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-4°F
73°F
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Continuous Use Temperature³		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latamid® 6 BH, Latamid 6 BH, Latamid® , Latamid, Latamid6BH, 6 BH, 6BH, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Lati, Polyamide6, Nylon6, BH6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Flow, High Melt, High MFI.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 MPa of cavity pressure

³20000 hr

Latamid® 6 BH