Laticonther 80 GR/50 Lati Polyphenylene Sulfide

Product Description

High thermal conductivity product based on Polyphenylene Sulphide (PPS).
Graphite.

General

Material Status

Availability

Additive

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM E1952-01
Continuous Use Temperature³		°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	ASTM D257
Volume Resistivity		ohm·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Glow Wire Flammability Index			IEC 60695-2-12
0.0394 in		°F
0.0787 in		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Laticonther 80 GR/50, Laticonther 80 GR50, Laticonther , Laticonther80GR50, 80 GR, 80 GR/50, 80 GR50, 80 GR:50, 80 GR+50, 80 GR-50, 80 GR_50, 80 GR 50, 80GR, GR50, 80GR50, 80GR_50, Polyphenylene Sulfide, PPS, Lati, PolyphenyleneSulfide, GR80

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 Mpa of cavity pressure

³20000 hr

Laticonther 80 GR/50