Laticonther 83 CP/85 Lati Polyamide 12

Product Description

High thermal conductivity product based on Polyamide 12 (PA 12), toughened.
Special filler.

General

Material Status

Availability

Additive

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM E1952-01
Continuous Use Temperature³		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Laticonther 83 CP/85, Laticonther 83 CP85, Laticonther , Laticonther83CP85, 83 CP, 83 CP/85, 83 CP85, 83 CP:85, 83 CP+85, 83 CP-85, 83 CP_85, 83 CP 85, 83CP, CP85, 83CP85, 83CP_85, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Lati, Polyamide12, Nylon12, CP83
Generic Name
Generic Name may also be described by the following terms: PA12.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 Mpa of cavity pressure

³20000 hr

Laticonther 83 CP/85