Latilub® 75/4-15ST G/30 Lati Polybutylene Terephthalate (Glass Fiber Reinforcement, 30%)

Product Description

Self-lubricating product based on Polybutylene Terephtalate (PBT).
Silicone / PTFE. Glass fibres.

General

Material Status

Availability

Filler / Reinforcement

Additive

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Coefficient of Friction			ASTM D3702
vs. Itself - Dynamic
vs. Itself - Static
Wear Factor		(m³/h)/(N·m·h)	ASTM D3702
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latilub® 75/4-15ST G/30, Latilub 75415ST G30, Latilub® , Latilub, Latilub75415STG30, 75, 75 4 15 ST G 30, 75/4-15ST G/30, 75415ST G30, 75:4-15ST G:30, 75+4-15ST G+30, 75-4-15ST G-30, 75_4-15ST G_30, 75 4-15ST G 30, 75/4:15ST G/30, 75/4/15ST G/30, 75/4+15ST G/30, 75/4_15ST G/30, 75/4 15ST G/30, 754, 415, 15ST, STG, G30, 75415STG30, 75_415ST G_30, 75 415ST G 30, 754_15ST G30, 754 15ST G30, 75_415STG_30, 754_15STG30, Polybutylene Terephthalate, PBT, Polyester, Lati, PolybutyleneTerephthalate, 475
Features
Features may also be described by the following terms: Self-Lubricating, Self Lubricating.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 Mpa of cavity pressure

Latilub® 75/4-15ST G/30