IDES Prospector Already have an account? Login Here

IDES

Latimass 82-05 D040

Polyamide 12

Supplied by LATI S.p.A.

The technical datasheet with complete property values for Latimass 82-05 D040 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Specific density compound based on Polyamide 12 (PA 12).
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage 2
    ISO 294-4
Across Flow: 0.0787 in
%
 
Flow: 0.0787 in
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
ISO 527-2/5
Tensile Strain (Break, 73°F)
%
ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
ASTM D257
Volume Resistivity
ohm·cm
ASTM D257
Electromagnetic Reflection
%
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latimass 82-05 D040, Latimass 8205 D040, Latimass , Latimass8205D040, 82, 82 05 D 040, 82-05 D040, 8205 D040, 82:05 D040, 82/05 D040, 82+05 D040, 82_05 D040, 82 05 D040, 8205, 05D, D040, 8205D040, 82_05D040, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Lati, Polyamide12, Nylon12, 0582
Generic Name
Generic Name may also be described by the following terms: PA12.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 Mpa of cavity pressure
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.