LatioHM 62-08 PD02 G/30 Lati Polyamide 6 (Glass Fiber Reinforcement, 30%)

Product Description

Dissipative compound based on Polyamide 6 (PA 6).
Glass fibres.

General

Material Status

Availability

Filler / Reinforcement

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	ASTM D257
Volume Resistivity		ohm·cm	ASTM D257
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LatioHM 62-08 PD02 G/30, LatioHM 6208 PD02 G30, LatioHM , LatioHM6208PD02G30, 62, 62 08 PD 02 G 30, 62-08 PD02 G/30, 6208 PD02 G30, 62-08 PD02 G:30, 62-08 PD02 G+30, 62-08 PD02 G-30, 62-08 PD02 G_30, 62-08 PD02 G 30, 62:08 PD02 G/30, 62/08 PD02 G/30, 62+08 PD02 G/30, 62_08 PD02 G/30, 62 08 PD02 G/30, 6208, 08PD, PD02, 02G, G30, 6208PD02G30, 6208 PD02 G_30, 6208 PD02 G 30, 62_08 PD02 G30, 62 08 PD02 G30, 6208PD02G_30, 62_08PD02G30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Lati, Polyamide6, Nylon6, 0862
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 Mpa of cavity pressure

LatioHM 62-08 PD02 G/30