IDES Prospector Already have an account? Login Here

IDES

LatioHM 63-08 PD02 G/25

Polyamide 6

Glass Fiber Reinforcement, 25%

Supplied by LATI S.p.A.

The technical datasheet with complete property values for LatioHM 63-08 PD02 G/25 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Dissipative compound based on Polyamide 6 (PA 6), toughened.
Glass fibres. Product UL certified.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
Additive 
  • Impact Modifier
Features 
  • Impact Modified
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in
 
  
0.0591 in
 
  
0.118 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LatioHM 63-08 PD02 G/25, LatioHM 6308 PD02 G25, LatioHM , LatioHM6308PD02G25, 63, 63 08 PD 02 G 25, 63-08 PD02 G/25, 6308 PD02 G25, 63-08 PD02 G:25, 63-08 PD02 G+25, 63-08 PD02 G-25, 63-08 PD02 G_25, 63-08 PD02 G 25, 63:08 PD02 G/25, 63/08 PD02 G/25, 63+08 PD02 G/25, 63_08 PD02 G/25, 63 08 PD02 G/25, 6308, 08PD, PD02, 02G, G25, 6308PD02G25, 6308 PD02 G_25, 6308 PD02 G 25, 63_08 PD02 G25, 63 08 PD02 G25, 6308PD02G_25, 63_08PD02G25, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Lati, Polyamide6, Nylon6, 0863
Generic Name
Generic Name may also be described by the following terms: PA6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 Mpa of cavity pressure
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.