IDES Prospector Already have an account? Login Here

IDES

Reny® 1032

Polyarylamide

Glass Fiber Reinforcement, 60%

Supplied by Mitsubishi Engineering-Plastics Corp

The technical datasheet with complete property values for Reny® 1032 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 60% Filler by Weight
Features 
  • General Purpose
Uses 
  • General Purpose
Forms 
  • Pellets
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/2.16 kg)
--
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)
--
in³/10min
 ISO 1133
Molding Shrinkage
--
%
 ISO 294-4
Water Absorption
       ISO 62
73°F, 24 hr
--
%
  
Equilibrium, 73°F, 50% RH
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
        
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
       ISO 11359-2
Flow
--
in/in/°F
  
Transverse
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
       IEC 60250
100 Hz
--
 
  
1 MHz
--
 
  
Dissipation Factor
       IEC 60250
100 Hz
--
 
  
1 MHz
--
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength
       IEC 60243-1
0.0394 in
V/mil
  
0.0787 in
V/mil
  
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0630 in)
--
 
 UL 94
Additional Information
Conditioned
CTI, IEC 60112: >600V
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 1032, Reny 1032, Reny® , Reny, Reny1032, 1032, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 1032, Reny 1032, Reny® , Reny, Reny1032, 1032, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.