IDES Prospector Already have an account? Login Here

IDES

LatioHM 90/13-09 PD01 G/10

Polyphenylene Ether + PS

Glass Fiber Reinforcement, 10%

Supplied by LATI S.p.A.

The technical datasheet with complete property values for LatioHM 90/13-09 PD01 G/10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Partially conductive/dissipative compound based on Modified Polyphenylene Oxyde (PPOm).
Glass fibres.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Electrically Conductive
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LatioHM 90/13-09 PD01 G/10, LatioHM 901309 PD01 G10, LatioHM , LatioHM901309PD01G10, 90, 90 13 09 PD 01 G 10, 90/13-09 PD01 G/10, 901309 PD01 G10, 90:13-09 PD01 G:10, 90+13-09 PD01 G+10, 90-13-09 PD01 G-10, 90_13-09 PD01 G_10, 90 13-09 PD01 G 10, 90/13:09 PD01 G/10, 90/13/09 PD01 G/10, 90/13+09 PD01 G/10, 90/13_09 PD01 G/10, 90/13 09 PD01 G/10, 9013, 1309, 09PD, PD01, 01G, G10, 901309PD01G10, 90_1309 PD01 G_10, 90 1309 PD01 G 10, 9013_09 PD01 G10, 9013 09 PD01 G10, 90_1309PD01G_10, 9013_09PD01G10, Polyphenylene Ether + PS, Polyphenylene Ether PS, Polyphenylene Ether : PS, Polyphenylene Ether / PS, Polyphenylene Ether - PS, Polyphenylene Ether _ PS, Polyphenylene Ether PS, PPE+PS, PPEPS, PPE:PS, PPE/PS, PPE-PS, PPE_PS, PPE PS, Polyphenylene Ether, PPE, Lati, PolyphenyleneEtherPS, PolyphenyleneEther, PolyphenyleneEther_PS, 1390
Generic Name
Generic Name may also be described by the following terms: PPO.
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 Mpa of cavity pressure
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.