IDES Prospector Already have an account? Login Here

IDES

Marvel™ M50

Polyethylene Copolymer

Supplied by SCG Chemicals Co., Ltd.

The technical datasheet with complete property values for Marvel™ M50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Marvel M50 is a color-compound of an ethylene octene copolymer for rotational moulding. Marvel M50 is specifically designed for applications requiring excellent environmental resistance and impact strength combined with low warpage and good processing. It is fully heat and UV stabilized resulting in a wide processing latitude, good colour retention, and long life expectancy.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Heat Stabilizer
  • UV Stabilizer
  
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Color Stability
  • Good Processability
  • Good Toughness
  • Heat Stabilized
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • High Rigidity
  • Low Warpage
  • Octene Comonomer
Uses 
  • Containers
  • Drums
  • Industrial Containers
  • Low Temperature Applications
  • Tanks
  • Water Sports Equipment
Agency Ratings 
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Granules
  • Powder
  
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (100% Antarox, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus - 1% Secant
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 DSC
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Additional Information
ARM Impact Strength, ISO 6603/2, -20°C: 25 J/mm
Typical Oven Temperature: 250 to 300°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marvel™ M50, Marvel M50, Marvel™ , Marvel, MarvelM50, M 50, M50, Polyethylene Copolymer, PE Copolymer, Polyethylene, PE, SCG, PolyethyleneCopolymer, PECopolymer, 50M
Features
Features may also be described by the following terms: High Rigidity, Good Toughness, Tough, Good Processability, Easy Processing, Good Color Stability, Octene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Impact Resistance, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers, Water Sports Equipment, Watersports Equipment, Water Sport Equipment.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.