IDES Prospector Already have an account? Login Here

IDES

Reny® 4011

Polyarylamide

Glass Fiber Reinforcement, 40%

Supplied by Mitsubishi Engineering-Plastics Corp

The technical datasheet with complete property values for Reny® 4011 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Electrically Conductive
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/2.16 kg)
--
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)
--
in³/10min
 ISO 1133
Molding Shrinkage
--
%
  
Water Absorption
       ISO 62
Saturation, 73°F
--
%
  
Equilibrium, 73°F, 50% RH
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
        
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
       ISO 11359-2
Flow
--
in/in/°F
  
Transverse
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0630 in)
--
 
 UL 94
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 4011, Reny 4011, Reny® , Reny, Reny4011, 4011, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP
Features
Dry
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 4011, Reny 4011, Reny® , Reny, Reny4011, 4011, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP
Injection
Dry
Unit
 
Drying Temperature
      
A
°F
  
B
°F
  
Drying Time
      
A
hr
  
B
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.