Reny® E40 Mitsubishi EP Polyarylamide (Mineral Filler, 40%)

General
Material Status	Commercial: Active
Availability	North America
Filler / Reinforcement	Mineral Filler, 40% Filler by Weight
Features	Platable

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (270°C/2.16 kg)		--	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)		--	in³/10min	ISO 1133
Molding Shrinkage		--	%	Internal Method
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength			ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed			°F	ISO 75-2/B
264 psi, Unannealed			°F	ISO 75-2/A
CLTE				ISO 11359-2
Flow		--	in/in/°F
Transverse		--	in/in/°F
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® E40, Reny E40, Reny® , Reny, RenyE40, E 40, E40, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 40E
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® E40, Reny E40, Reny® , Reny, RenyE40, E 40, E40, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 40E

Notes

¹Typical properties: these are not to be construed as specifications.

Reny® E40