Reny® C36 Mitsubishi EP Polyarylamide (Carbon Fiber Reinforcement, 30%)

General

Material Status

Availability

Filler / Reinforcement

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/2.16 kg)		--	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)		--	in³/10min	ISO 1133
Molding Shrinkage		--	%
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed			°F	ISO 75-2/B
264 psi, Unannealed			°F	ISO 75-2/A
CLTE				ISO 11359-2
Flow		--	in/in/°F
Transverse		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohm	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® C36, Reny C36, Reny® , Reny, RenyC36, C 36, C36, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 36C
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® C36, Reny C36, Reny® , Reny, RenyC36, C 36, C36, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 36C

Notes

¹Typical properties: these are not to be construed as specifications.

Reny® C36