IDES Prospector Already have an account? Login Here

IDES

Mapex AN0720SB-02

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Ginar Technology Co., LTD.

The technical datasheet with complete property values for Mapex AN0720SB-02 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Mapex AN0720SB-02 is a 30% glass-fibre Reinforced nylon 6 heat stabilized
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Fuel Resistant
  • Good Chemical Resistance
  • Good Electrical Properties
  • Good Moldability
  • Good Wear Resistance
  • Good Weather Resistance
  • Heat Stabilized
  • High Gloss
  • High Heat Resistance
  • Oil Resistant
  • Solvent Resistant
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage - Flow (0.0630 in)
in/in
 ASTM D955
Water Absorption
      
24 hr
%
 ASTM D570
73°F, 24 hr
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Melting Temperature
°F
 DSC
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Strength (0.0787 in)
V/mil
 ASTM D149, IEC 60243-1
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Additional Information
Notched Izod Impact Strength, ISO 180/1: 100 J/m
Arc Resistance, ASTM D495: 130 to 140 sec
Dielectric Strength, ISO 243: 26 kV/mm
The value listed as Volume Resistance ICE 60093, was tested in accordance with IEC 167.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Mapex AN0720SB-02, Mapex AN0720SB02, Mapex , MapexAN0720SB02, AN 0720 SB, AN0720SB, AN 0720 SB 02, AN0720SB-02, AN0720SB02, AN0720SB:02, AN0720SB/02, AN0720SB+02, AN0720SB_02, AN0720SB 02, AN0720, 0720SB, SB02, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Ginar, Polyamide6, Nylon6, 0720AN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Gloss, Good Electrical Properties, High Heat Resistance, Good Chemical Resistance, Chemical Resistant, Good Moldability, Good Wear Resistance, Wear Resistant, Good Weather Resistance, Weather Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Holding Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.