LONGLITE PBT 3010 Chang Chun Polybutylene Terephthalate (Glass Fiber Reinforcement, 10%)

Product Description

Polybutylene Terephthalate is a injection moulding grade 10 % glass fiber

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 10% Filler by Weight

Features

Fuel Resistant

Good Chemical Resistance

Good Electrical Properties

Good Moldability

Good Wear Resistance

Good Weather Resistance

High Heat Resistance

Oil Resistant

Solvent Resistant

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage			ASTM D955
Flow: 0.0630 in		in/in
Across Flow: 0.0630 in		in/in
Water Absorption
24 hr		%	ASTM D570
73°F, 24 hr		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress
Yield		psi	ISO 527-2
--		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.250 in)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature		°F	DSC
CLTE - Flow		in/in/°F	ASTM D696, ISO 11359-2
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Dielectric Constant (60 Hz)			IEC 60250
Dissipation Factor (60 Hz)			IEC 60250
Electric Strength (0.0787 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0315 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LONGLITE® PBT 3010, LONGLITE PBT 3010, LONGLITE® PBT , LONGLITE PBT, LONGLITEPBT3010, LONGLITEPBT, PBT 3010, PBT3010, PBT, 3010, Polybutylene Terephthalate, Polyester, Chang Chun, PolybutyleneTerephthalate, 3010PBT
Features
Features may also be described by the following terms: Good Electrical Properties, High Heat Resistance, Good Chemical Resistance, Chemical Resistant, Good Weather Resistance, Weather Resistant, Good Wear Resistance, Wear Resistant, Good Moldability.

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Holding Pressure		psi
Back Pressure		psi
Screw Speed		rpm

Notes

¹Typical properties: these are not to be construed as specifications.

LONGLITE® PBT 3010

Polybutylene Terephthalate

Glass Fiber Reinforcement, 10%

Supplied by Chang Chun Plastics Co., LTD.