IDES Prospector Already have an account? Login Here

IDES

Fortron® 1130L0

Polyphenylene Sulfide

Glass Fiber Reinforcement, 30%

Supplied by Ticona

The technical datasheet with complete property values for Fortron® 1130L0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Fortron 1130L0 is a 30% glass-reinforced extrusion grade. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for good load bearing performance. This product has good weldability due to the modest filler level. 1130L0 is used to produce rods and slabs.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Flame Retardant
  • Good Chemical Resistance
  • Good Electrical Properties
  • Halogen Free
  • High Hardness
  • High Heat Resistance
  • High Rigidity
Uses 
  • Rods
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature 2
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0150 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fortron® 1130L0, Fortron 1130L0, Fortron® , Fortron, Fortron1130L0, 1130 L 0, 1130L0, 1130L, L0, Polyphenylene Sulfide, PPS, Ticona, PolyphenyleneSulfide, L1130
Features
Features may also be described by the following terms: High Hardness, Hard, High Heat Resistance, High Rigidity, Good Chemical Resistance, Chemical Resistant, Good Electrical Properties, Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Rods, Rod.
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.