IDES Prospector Already have an account? Login Here

IDES

Lubriblend® PA4/6 CF30 TL15

Polyamide 46

Carbon Fiber Reinforcement, 30%

Supplied by TP Composites, Inc.

The technical datasheet with complete property values for Lubriblend® PA4/6 CF30 TL15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 30% Filler by Weight
Additive 
  • PTFE Lubricant (150000 ppm)
Features 
  • Good Wear Resistance
  • Low Friction
  • Lubricated
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lubriblend® PA4/6 CF30 TL15, Lubriblend PA46 CF30 TL15, Lubriblend® , Lubriblend, LubriblendPA46CF30TL15, PA 4, PA 4 6 CF 30 TL 15, PA4/6 CF30 TL15, PA46 CF30 TL15, PA4:6 CF30 TL15, PA4+6 CF30 TL15, PA4-6 CF30 TL15, PA4_6 CF30 TL15, PA4 6 CF30 TL15, PA4, 46, 6CF, CF30, 30TL, TL15, PA46CF30TL15, PA4_6CF30TL15, Polyamide 46, Nylon 46, Polyamide, Nylon, pa46, TP Compos, Polyamide46, Nylon46, 4PA
Generic Name
Generic Name may also be described by the following terms: PA46.
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, Low Friction.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.