IDES Prospector Already have an account? Login Here

IDES

IROGRAN® A 80 H 4698

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® A 80 H 4698 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN A 80 H 4698 is a transparent thermoplastic polyester-polyurethane for injection moulding applications.

Additional characteristics of the product are good melt flow and easy demolding also for undercut.

PERFORMANCE FEATURES
  • Easy demolding
  • Good melt flow
  • High transparence
  • High elasticity
  • Low-temperature flexibility

APPLICATIONS
For the production of casual shoe soles, o-rings screens, technical parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Flow
  • Good Mold Release
  • High Clarity
  • High Elasticity
  • Low Temperature Flexibility
Uses 
  • Engineering Parts
  • Footwear
  • Seals
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
 
  
Melt Volume-Flow Rate (MVR) (190°C/21.6 kg)
in³/10min
  
Molding Shrinkage - Flow (Injection Molded)
in/in
 ASTM D955
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2
     DIN 53504
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress 2 (Break)
psi
 DIN 53504
Tensile Elongation 2 (Break)
%
 DIN 53504
Tear Strength 2
lbf/in
 ISO 34-1
Compression Set 2
     ASTM D395, ISO 815
73°F, 24.0 hr
%
  
158°F, 24.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
      
Shore D, Injection Molded
 
 ASTM D2240
Shore A, Injection Molded
 
 ISO 868
Shore D, Injection Molded
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® A 80 H 4698, IROGRAN A 80 H 4698, IROGRAN® , IROGRAN, IROGRANA80H4698, A 80 H 4698, A80, 80H, H4698, A80H4698, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, 80A
Features
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Good Flow, High Elasticity, Highly Elastic, Low Temperature Flexibility, High Clarity.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
      
--
°F
  
Hot Air Dryer
°F
  
Drying Time
      
--
hr
  
Hot Air Dryer
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.