IDES Prospector Already have an account? Login Here

IDES

IROGRAN® A 80 P 4699 L

Thermoplastic Polyurethane Elastomer (Polyether)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® A 80 P 4699 L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN A 80 P 4699 L is a high performance polyether based thermoplastic polyurethane intended for extrusion and injection mold applications.

IROGRAN A 80 P 4699 L is part of the HUNTSMAN extrusion / injection mold product range.

PERFORMANCE FEATURES
  • Good melt flow
  • Low adhesion surface
  • High flexibility
  • Good processability
  • Soft
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Flexibility
  • Good Flow
  • Good Processability
  • Soft
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
 
 ASTM D792
Melt Volume-Flow Rate (MVR) (190°C/21.6 kg)
in³/10min
  
Molding Shrinkage - Flow (Injection Molded)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Abrasion 2
      
--
mm³
  
--
mm³
 DIN 53515
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3
      
100% Strain, 0.0250 in
psi
 ASTM D412
100% Strain, 0.0250 in
psi
 DIN 53504
300% Strain, 0.0250 in
psi
 ASTM D412
300% Strain, 0.0250 in
psi
 DIN 53504
Tensile Strength 3
      
Break, 0.0250 in
psi
 ASTM D412
Break, 0.0250 in
psi
 DIN 53504
Tensile Elongation 3
      
Break, 0.0250 in
%
 ASTM D412
Break, 0.0250 in
%
 DIN 53504
Tear Strength 3
      
0.0250 in
lbf/in
 ASTM D624
0.0250 in
lbf/in
 DIN 53515
Compression Set 2
     ASTM D395, DIN 53517
73°F, 22.0 hr
%
  
158°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, Injection Molded)
 
 ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 4
°F
 TMA
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® A 80 P 4699 L, IROGRAN A 80 P 4699 L, IROGRAN® , IROGRAN, IROGRANA80P4699L, A 80 P 4699 L, A80, 80P, P4699, 4699L, A80P4699L, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane, 80A
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Good Processability, Easy Processing, Good Flow.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
3Extruded Film
4Extruded Film, 0.025 in
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.