IDES Prospector Already have an account? Login Here

IDES

Geon™ Vinyl Flexible 86479 Opaq

Flexible Polyvinyl Chloride

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Vinyl Flexible 86479 Opaq is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Biocide
  • UV Stabilizer
  
Features 
  • High Gloss
  • UV Absorbing
  
Uses 
  • Construction Applications
  • Film
  • Sheet
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Break
psi
  
100% Strain
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 3
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore A, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Flexible 86479 Opaq, Geon Vinyl Flexible 86479 Opaq, Geon™ Vinyl Flexible , Geon Vinyl Flexible, GeonVinylFlexible86479Opaq, GeonVinylFlexible, Flexible 86479 Opaq, Flexible86479 Opaq, Flexible86479, Flexible, Flexible86479Opaq, 86479 Opaq, 86479Opaq, Polyvinyl Chloride, Flexible, Polyvinyl Chloride Flexible, PVC, Flexible, PVC Flexible, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideFlexible, PVCFlexible, PolyvinylChloride, Opaq86479, 86479Flexible
Features
Features may also be described by the following terms: High Gloss, UV Absorbing, Ultraviolet Absorbing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
3Die C, 20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.